How to configure a Belkin router

If you are using a Grandstream phone adapter

For the first step in this process, we will need resolve the IP address conflict between the router and the Grandstream. Please follow these instructions for resolving an IP address conflict.

---

Please follow these instructions to configure your How to configure a Belkin router router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.2.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is (blank)

---

Click to enlarge

• Once you are logged in click on Firewall on the left menu bar.

---

Click to enlarge

• Disable the SPI Firewall and click Apply.
• Click on DMZ on the left menu bar.
• Enable the DMZ
• Enter the IP address that you received from your phone adapter in the second step of this process.
• Click Apply.

---

Note: If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.