D-Link DIR Series

Please follow these instructions to configure your D-Link DIR Series router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.0.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is Admin The default password is (blank)

---

Attention
	Routers included in the DIR series: DIR-615 / DIR-625 / DIR-628 / DIR-655 / DIR-815 / DIR-855

• Once you are logged in click on Advanced at the top.
• Click on FIREWALL SETTINGS on the left menu bar.
• Make sure to un-check SPI Firewall and SIP ALG options.
• Click the box next to Enable DMZ so that the check mark is in the box.
• Enter the IP address of your phone adapter into the DMZ IP Address field.

• Click on Save Settings at the top of the page.

---

Note: If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.