Configuring The Innomedia with a Static IP
From PhonePower Knowledge Base
To configure the Innomedia with a static IP address, follow this walkthrough.
If plugging into the PC port, log into the device at the LAN IP http://192.168.99.1
If the device is on the same router as your PC, you should be able to access it by entering the IP it reports with *** 1 into your web browser.
The username is User and the admin level password is password.
- The username and password are Case Sensitive and must be entered exactly as they appear above.
Once logged in, click on Interface Setting on the left hand side.
UNCHECK the box labelled Enable DHCP to set the device in a static mode.
Define the desired static IP Address, Subnetmask and Default Gateway in their respective fields.