Configuring The Innomedia with PPPoE
From PhonePower Knowledge Base
To configure the Innomedia with PPPoE credentials, follow this walkthrough
If plugging into the PC port, log into the device at the LAN IP http://192.168.99.1
If the device is on the same router as your PC, you should be able to access it by entering the IP it reports with *** 1 into your web browser.
The username is User and the admin level password is password.
- NOTE: The username and password are Case Sensitive and must be entered exactly as they appear above.
Once logged in click on PPPoE Setting on the left hand side.
Next, check the box labelled Enable PPPoE.
Enter the PPPoE username in the User ID field and enter the password in the Password field.