Linksys IVR Menu
Accessing the Interactive Voice Response Menu
• Use a telephone connected to the PHONE 1 or PHONE 2 port of the Phone Adapter.
• Dial **** to access the menu.
• You will hear Linksys Configuration Menu. Please enter option followed by the # (pound) key or hang up to exit.
- Note: After you select an option, press the # (pound) key. To exit the menu, hang up the telephone. Using the Interactive Voice Response Menu While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key twice within half a second. Otherwise, the * will be treated as a decimal point or dot. After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection.
• To save the new setting, press 1.
• To review the new setting, press 2.
• To re-enter the new setting, press 3.
• To cancel your entry and return to the main menu, press * (star).
For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address, and then press 1 to save the IP address. To cancel your entry and return to the main menu, press * (star). If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the menu by pressing ****.
The settings you have saved will take effect after you have hung up the telephone. The Phone Adapter may reboot at this time. Please refer to the following table that lists actions, commands, menu choices, and descriptions.
IVR Menu Choices
| IVR Action | IVR Menu Choice | Parameter(s) | Notes |
|---|---|---|---|
| Enter IVR Menu | **** | None | Ignore SIT or other tones until you hear, "Sipura/Linksys configuration menu.
Please enter option followed by the pound key or hang-up to exit". |
| Exit IVR Menu | 3948 | None | None |
| Check DHCP | 100 | None | IVR will announce if DHCP is enabled or disabled. |
| Enable/Disable DHCP | 101 | Enter 1 to enable
Enter 0 to disable |
Requires Password |
| Check IP Address | 110 | None | IVR will announce the current IP address of the Phone Adapter. |
| Set Static IP address | 111 | Enter IP address using numbers on the telephone key pad. Use
the * (star) key when entering a decimal point. |
DHCP must be "Disabled" otherwise you will hear, "Invalid Option," if
you try to set this value. Requires Password. |
| Check Network Mask | 120 | None | IVR will announce the current network mask of the Phone Adapter. |
| Set Network Mask | 121 | Enter value using numbers on the telephone key pad. Use
the * (star) key when entering a decimal point. |
DHCP must be "Disabled" otherwise you will hear, "Invalid Option," if
you try to set this value. Requires Password. |
| Check Static Gateway IP Address | 130 | None | IVR will announce the current gateway IP address of the Phone Adapter. |
| Set Static Gateway IP Address | 131 | Enter IP address using numbers on the telephone key pad. Use
the * (star) key when entering a decimal point. |
DHCP must be "Disabled" otherwise you will hear, "Invalid Option," if
you try to set this value. Requires Password. |
| Check MAC Address | 140 | None | IVR will announce the MAC address of the Phone Adapter in hex string format. |
| Check Firmware Version | 150 | None | IVR will announce the version of the firmware running on the Phone Adapter. |
| Check Primary DNS Server Setting | 160 | None | IVR will announce the current setting in the Primary DNS field. |
| Set Primary DNS Server | 161 | Enter IP address using numbers on the telephone key pad. Use
the * (star) key when entering a decimal point. |
Requires Password |
| Check Web Server Port | 170 | None | IVR will announce the port that the web server is listening
on. (Default is 80) |
| Enable/Disable Web Server | 7932 | Enter 1 to enable
Enter 0 to disable |
Requires Password. |
| Manual Reboot | 732668 | None | After you hear "Option Successful," hang-up. The Phone Adapter
will reboot automatically. |
| User Factory Reset of Unit | 877778 | Enter 1 to confirm
Enter *(star) to cancel operation. |
WARNING: ALL "User-Changeable" NONDEFAULT SETTINGS WILL BE LOST! This might include network and service provider data. The Phone Adapter will prompt for confirmation. After confirming, you will hear "Option Successful". Hangup. The Phone Adapter will reboot and all "User Changeable" configuration parameters will be reset to factory default values. |
| Factory Reset of Unit | 73738 | Enter 1 to confirm
Enter * (star) to cancel operation |
WARNING: ALL NON-DEFAULT SETTINGS WILL BE LOST! This includes network and service provider data. The Phone Adapter will prompt for confirmation. After confirming, you will hear "Option Successful". Hangup. The Phone Adapter will reboot and all configuration parameters will be reset to factory default values. |
