Home  |  Residential Plans  |  Business Plans  |  International Rates  |  Features  |  Hardware  |  Support  |  Contact Us  |  About Us

How to Configure a Westell 6100F to function with the Grandstream...

 

How to Configure a Westell 6100F to function with the Grandstream


To Configure your device to function with the Grandstream connected to it, please follow these instructions.

For the first step in this process, we will need to find out the current IP Address being assigned to your Grandstream by your router.  Please refer to How to Receive the IP Address on a Grandstream for information.

Now, connect your computer directly to the LAN port of the Grandstream, and open up a web browser and navigate to http://192.168.1.1 and login to the Westell 6100F.

Once you are logged in, click on Firewall settings.

Click on DMZ Hosting.
  - Enable the DMZ host and set the IP address to the IP address that we received in the first step of this process.

Save the settings.

Now, go to http://192.168.2.1 and log into the Grandstream with password 123.

 - Once on the Status page, click on Basic Settings.
 

- Scroll down the page a little ways until you see Statically Configured as and select the radio button for it.

    - set the IP address to the IP address that you received in the first step of this process.
    - set the Subnet Mask to 255.255.255.0.
    - set the Default Router to 192.168.1.1.
    - set the DNS Server 1 to 4.2.2.2.

  - Scroll down to the bottom of the page and click on Update, then Reboot on the next page.

After 5-10 minutes the Grandstream should be registered and online.


If you are unable to place a call after 15 minutes, please contact our support department for additional assistance.


Add Your Comments


Comment require login or registration.

Details
Last Modified:Wednesday, October 14, 2009
Type: HOWTO
Article not rated yet.
Options


Powered By InstantKB.NET 2.0.4 © 2009
Execution: 0.156. 7 queries. Compression Disabled.