How to configure a Lynx 526 to Function with the Grandstream

 

How to configure a Lynx 526 to Function with the Grandstream


To Configure your device to function with the Grandstream connected to it, please follow these instructions.


For the first step in this process, we will need to find out the current IP Address being assigned to your Grandstream by your router.  Please refer to How to Receive the IP Address on a Grandstream for information.

Now, connect your computer directly to your router, and open up a web browser and navigate to http://192.168.1.1 and login to the router.
   - The default username and password are both admin.

Once you are logged in, click on Advanced Setup on the left menu bar.

Click on NAT.



Click on DMZ Host.




In the DMZ Host IP Address field, type in the IP address that you received from the Grandstream in the first step of this process.

Click on Save/Apply to save the settings.


You will need to reboot the Grandstream device for this to take effect. Simply remove the power cord from the back of the Grandstream, wait 20 seconds, and put it back in. After 5-10 minutes the Grandstream should be registered and online.

If you are unable to place a call after 15 minutes, please contact our support department for additional assistance.

Tags:

Add Your Comments


Comment require login or registration.

Details
Last Modified:Tuesday, June 16, 2009
Type: HOWTO
Article not rated yet.
Options


Powered By InstantKB.NET 2.0.4 © 2010
Execution: 0.047. 7 queries. Compression Disabled.