Home  |  Residential Plans  |  Business Plans  |  International Rates  |  Features  |  Hardware  |  Support  |  Contact Us  |  About Us

How to Configure a Linksys WRT54G/WRT300N series to function with...

 

How to Configure a Linksys WRT54G/WRT300N series to function with the Grandstream


Please follow these instructions to configure a Linksys WRT54G/WRT300N series router to work with the Grandstream.  These instructions are only if you are connecting the Grandstream to one of the numbered ports on the Linksys router.


First, turn off the power to the Grandstream, the router can stay powered on.

Connect an ethernet cable from one of the numbered ports on the router to the WAN port of the Grandstream.

Then, power on the Grandstream.

Now, we will need to enable WAN port Web access to the Grandstream.  Please refer to Enabling WAN port web access on the Grandstream for information.


Now, Connect your computer to the Linksys router and login.
  - To log into the router, Open your browser window and in the address bar, type http://192.168.1.1 and press enter.
  - Default username is admin and password is admin.
  - Once logged in, click on Security.



  - Click on the radio button next to Disabled and click on Save Settings.
      *** Note ***
                - Not all Linksys routers will have the above option, if you do not see this option on this page in the router, then continue with the rest of the setup steps.

  - Click on Continue.

  - Click on Applications and Gaming.
  - Click on Port Forwarding.
     - Please assign the ports as seen below to the IP address as seen below.



Port ranges to forward are 5060 -5061, 5004-5012 under the protocol of UDP directed towards the IP address of 192.168.1.95.

Port forward single port 4200 and port 23 as shown above directed towards the IP address of 192.168.1.95.


Now, we will need to find out the current IP Address being assigned to your Grandstream by your router.  Please refer to How to Receive the IP Address on a Grandstream for information.


Once you have the Grandstream's current IP address, open another browser window and in the address bar, type in the IP address that you received from the Grandstream and press enter.
  - At the Grandstream log on page, password is 123.



  - Once on the Status page, click on Basic Settings.




    - First, change the Web Port to 4200.

    - Scroll down the page a little ways until you see Statically Configured as and select the radio button for it.



    - Set the IP to 192.168.1.95.
    - Set the Subnet Mask to 255.255.255.0.
    - Set the Default Router to 192.168.1.1.
    - Set the DNS Server 1 to 4.2.2.2.
   - Set the DNS Sever 2 to 4.2.2.1.

  - Scroll down to the bottom of the page and click on Update, then Reboot on the next page.

After 5-10 minutes the Grandstream should be registered and online.


If you are unable to place a call after 15 minutes, please contact our support department for additional assistance.

*** Note ***
    - If you still need to access the Grandstream after these changes have been made, type in the address bar of your browser window - http://192.168.1.95:4200, the password is 123.


Add Your Comments


Comment require login or registration.

Details
Last Modified:Tuesday, October 13, 2009
Type: HOWTO
Rated 5 stars based on 1 vote.
Options


Powered By InstantKB.NET 2.0.4 © 2010
Execution: 0.078. 7 queries. Compression Disabled.